RTP-O3B PCI 2 SERIAL /1 PRINTER CARD USER'S MANUAL
1) FEATURES
SERIAL PORT:
* 16 BYTE TRANSMIT-RECEIVE FIFO (UART).
* PROGRAMMABLE BAUD RATE BY SOFTWARE.
* SERIAL'S OPERATING CLOCK SELECT BY HARDWARE. (SERIAL SPEED Max. UP
TO 1384KB/S, DEFAULT SETTING UP TO 115.2KB/S)
* I/O ADDRESS SELECT BY SOFTWARE : PLUG & PLAY OR RE-MAP TO ISA
ADDRESS 3F8H, 2F8H, 3E8H, 2E8H.
PARALLEL PORT:
* MULTI-MODE COMPATIBLE (SPP, BPP, EPP, ECP)
* FAST DATA RATES UP TO 1.5 Mbytes/S
* CAN SUPPORT 16 BYTE FIFO
* SOFTWARE PROGRAMMABLE MODE SELECT
* BOARD'S INTERRUPT SELECT BY HARDWARE
* I/O ADDRESS SELECT BY SOFTWARE : PLUG & PLAY OR RE-MAP TO ISA
ADDRESS 378H, 278H.
2) HARDWARE DESCRIPTION
JP3 : BOARD'S INTERRUPT SELECT. DEFAULT SETTING AT POSITION 1 (INTRA).
SERIAL PORT : CONTROL JUMPER -- MK1, JK1, S1 JK2, S2
MK1 : SERIAL OPERATING FREQUENCY GROUP SELECT
1&2 (FS) -- FIIRST FREQUENCY GROUP SELECT.
2&3 (SS) -- SECOND FREQUENCY GROUP SELECT.
JK1 : FIRST SERIAL PORT CLOCK SELECT.
S1 : FIRST SERIAL PORT CONNECTER.
JK2 : SECOND SERIAL PORT CLOCK SELECT.
S2 : SECOND SERIAL PORT CONNECTER.
| MK1 | JK1,JK2 | DESCRIPTION (1xK:Max.=115.2KB/S) |
| 1&2 | 1K | DEFAULT (1xK = 1.84MHZ) |
| 2K | SELECTABLE (2xK = 3.68MHZ) | |
| 4K | SELECTABLE (4xK = 7.36MHZ) | |
| 12K | SELECTABLE (12xK = 21.O8MHZ) | |
| 2&3 | (2.75K) | SELECTABLE (2.75K = 5.O6MHZ) |
| (5.5K) | SELECTABLE (5.5K = 1O.1MHZ) | |
| (11K) | SELECTABLE (11K = 2O.2MHZ) |
PRINTER PORT : CONTROL JUMPER -- JP4, P2
JP4 : SPECIAL PURPOSE FOR CONNECT PORT'S PIN (24) VOLTAGE OUTPUT
HARDWARE SELECT. DEFAULT SETTING AT EMPTY.
1&2 - FOR VOLTAGE +12V OUTPUT.
2&3 - FOR POWER GROUND.
P2 : FIRST PCI PARALLEL PRINTER PORT CONNECTOR.
3) SOFTWARE DESCRIPTION
* SOFTWARE DRIVER SUPPORT TO WINDOWS 95, WINDOWS 98, WINDOWS NT,
WINDOWS 2OOO, LINUX SYSTEM AND DOS OPERATING SYSTEM (FILE/? FOR
DOS DRIVER SETTING).
4) INSTALLATION:
STEP 1. CHECK THE COMPUTER OPERATING SYSTEM AND SELECT SOFTWARE
TO UNZIP THE ZIP FILE.
STEP 2. REMOVE THE HOST COMPUTER AC POWER LINE SUPPLY.
STEP 3. PLUG THE RTP-O3B ADAPTER INTO THE MOTHER BOARD.
STEP 4. CONNECT THE PRINTER MACHINE OR RELATIVE MACHINE TO THE
RTP-O3B BOARD'S CONNECTOR.
STEP 5. PLUG AC POWER LINE TO THE HOST PC.
STEP 6. STEP BY STEP, FOLLOW WINDOW'S INSTRUCTION AND INSTALL THE
DRIVERS TO WINDOWS OPERATING SYSTEM FROM UNZIP FILE.
| Home | IPC index |
|
Start: 1/18/2002 Update: 02.15.2011
