CV-72P PCI to ISA Bridge Card series

* PCI card plugged into connector figure

PCI to ISA Bridge Kits	Reference Design Kit

1. If you are not a professional Firmware/Software and Hardware engineer,

please don't buy these cards, because must write a "Device Program" by yourself.

2.We only sell the PCI to ISA bridge card, do not provide any software and

hardware support.

3. Different from CV-71P series: If the ISA bus Add-on card which want to be converted

is Target/Slave mode, can only write SM-boot ROM(24C16) Data to convert completely,

(but can't 100% guarantee can work).

CV72P+80H PCI to ISA Bridge Card

Function Description:

* If motherboard use Firmware Hub BIOS, not support ISA bus BIOS again, use PCI to ISA

bridge card to convert PCI bus into ISA bus for Flash ROM/EPROM BIOS/Simulator using.

* LED inductor: 3.3V, 5V, +12V,- 12V, GND, RST(ReSeT), IORDY(I/O channel ReaDY),

PRST(PCI ReSeT), SERR, PAR, (Option: - 5V, FRAME, IRDY, TRDY, STOP, DEVSEL)

signals LED inductor.

* DIP and PLCC 32pin ROM socket x1.

* One 80H/180H/280H port BIOS POST code display, will know motherboard problem,

and repair it quickly.

* Port 80H/180H/280H is PCI bus 32 bit(A0-A31) full address decoding, if any 1bit with

problem the POST code can not work.

* Suitable for BIOS/Software engineer, use 32pin ROM socket to do

BIOS Programming/Simulate/Modify.

CV72P-ISA PCI to ISA Bridge Card

Function Description:

* If motherboard chipset do not support ISA bus, can use PCI to ISA bridge card

to convert PCI bus into ISA bus, and you can study Specification to write "Device Program"

or SM-boot ROM(24C16) Data for yourself.

* LED inductor: 3.3V, 5V, +12V,- 5V(Option),- 12V, GND, RST(ReSeT),

IORDY(I/O channel ReaDY), PRST(PCI ReSeT), FRAME, IRDY, TRDY,  SERR, PAR,

STOP and DEVSEL(Option) 16pcs signals LED inductor.

* ISA 98pin Slot x2, with Left-angle/side x1 and Up side x1 or Right-angle/side x1 (option),

this PCI to ISA bus function is fully compatible with ISA bus (but can't 100% guarantee all

ISA Add-On card can work).

* PS1: Your must link PPDREQ# and PPDGNT# and SERIRQ signals to motherboard

chipset, and then can run Bridge Card on ISA bus DMA function.

* PS2: motherboard BIOS must support ITE8888, otherwise ISA bus Add-On card

can't work, if your BIOS do not support, can use "Device Program" from boot to work,

but you must study  Specification and to write "Device Program" or SM-boot ROM(24C16)

value for yourself.

CV72PS-ISA+80H PCI to ISA Bridge Card

Function Description:

* Except CV71P-ISA functions, additional:

1. One 80H/180H/280H port BIOS POST code display, will know motherboard problem,

and repair it quickly.

Port 80H/180H/280H is PCI bus 32 bit(A0-A31) full address decoding, if any 1bit with

problem the POST code can not work.

2. DIP and PLCC 32pin ROM socket x1; Suitable for BIOS/Software engineer,

use 32pin ROM  socket to do BIOS Programming/Simulate/Modify.

GENERAL DESCRIPTION: PCI to ISA bridge chip ITE8888

1. If you are not a professional Firmware/Software and Hardware engineer,

please don't buy these cards, because must write a "Device Program" by yourself.

2.We only sell the PCI to ISA bridge card, do not provide any software and

hardware support.

3. The bridge card is convert PCI bus into ISA bus, can't 100% guarantee all motherboard

and ISA Add-On card can work, so

Offer special price to sample test, but can't return and refund!

(Offer One company/One time/One piece Only, C&F= Cost and Freight)

-----------------------------------------------------------------------------------------------------

* Could modify BIOS port 80h(POST code decode address) to other port address,

example 80h+84h, each piece plus U$5.-

Start: 1/16/2002 Update: 04.01.2011