DDR3 Gold Fingers Protector/Slot/Riser card/Test socket/Interposer
240p Open-Short test card
Others RAM/SDRAM/DDR/DDR2 Memory module series products
Attention:
1. Whole signals of gold fingers Protector/Slot/Riser card/Test Socket
not 100% one to one(1:1) convert, please check specification.
2. No matter how many Slot/Socket, only can use one Slot/Socket at a time.
3. All Converters/Test Socket/Riser card/Extender card have Timing, Delay, Impedance,
Resistance contact problem, so we can't guarantee can work 100%,
if any unreliable, please under-Data Rate(MT/s) perhaps can improve it.
4. External Converter, if occur unreliable, try to shorten the cable length will be more stable.
|
|
(Discontinued) |
 |
 |
 ¡@ |
| Gold Fingers
Protector * To extent the DDR3 module gold fingers or socket life. |
|
| CV08R-DDR3S (Discontinued) | |
| CV08R-DDR3S+Led (Discontinued) | |
| Option: +Led Add ReSeT#, ERR#, CK0,
CK0#, RAS#, WE#, S0#,CAS#, S1#, VDD, signal LED and the Led only light on the Power-On moment, other time is light off.¡@ |
|
 CV08R-DDR3Sv1.1 |
inquiry |
| CV08R-DDR3Sv1.1+Led | inquiry |
| Option: +Led Add ReSeT#, ERR#, CK0,
CK0#, RAS#, WE#, S0#,CAS#, S1#, VDD
signal LED |
¡@ |
¡@
| Socket/Riser card * Change the DDR3 RAM Module insert position. (Right-insert) Right-angle/side Socket x1, for RAM Module insert to Right slot (Component side up). (Left-insert) Left-angle/side Socket x1, for RAM Module insert to Left slot (Solder side up). (Stand-insert) Stand type Socket x1, for RAM Module insert to Top slot (No change position). * Easy for Logic Analyzer and Oscilloscope to measure RAM Module every pin signal. |
|
| CV08R-DDR3L(Left insert socket x1) | inquiry |
| CV08R-DDR3R(Right insert socket x1) | inquiry |
| CV08R-DDR3RL-PCB | inquiry |
| Option: +Led Add ReSeT#, ERR#, CK0,
CK0#, RAS#, WE#, S0#,CAS#, S1#, VDD, signal LED and the Led only light on the Power-On moment, other time is light off. |
¡@ ¡@ ¡@ |
| Option: +L Add L-Left socket x1 | |
| Option: +R Add R-Right socket x1 | |
| Option: +S Add S-Stand/Top socket x1 | |
| Option: +PH Add PH=68p x3/4 Pin Head | |
 |
 |
| Test Socket
* Gold fingers pin to pin(1 to 1) connect to module socket, the common pin VDD(Power)/VSS(Ground) didn't connect with together. * Easy for Logic Analyzer and Oscilloscope to measure Ram Module every pin signal. |
|
| CV09R-DDR3S | inquiry |
| CV09R-DDR3S+Led | inquiry |
| CV09R-DDR3S-PCB | inquiry |
| CV09R-DDR3S-NF switch VDD power On-oF and Reset signal | inquiry |
| CV09R-DDR3S-NF+Led | inquiry |
| Option: +Led Add ReSeT#, ERR#, CK0,
CK0#, RAS#, WE#, S0#,CAS#, S1#, VDD, signal LED and the Led only light on the Power-On moment, other time is light off. |
¡@ |
| CV09DDR3-2(DDR3 to
DDR2 without converter function) DDR3 gold fingers pin to pin(1 to 1) connect to DDR2 socket. CV09DDR3-2-PCB Option: +DDR2S Add DDR2-240S S-Stand socket. |
inquiry |
| CV09DDR3-2K(DDR3
to DDR2 without converter function) DDR3 socket pin to pin(1 to 1) connect to DDR2 socket. |
inquiry |
| CV09DDR3-2K-PCB | inquiry |
 |
 |
 |
| DDR3
interposer card For
function DDR3 Thermal Testing Form gold fingers Power pin: VREFDQ, VTT, VDD, VREFCA, VDDSPD, VTT you can soldered a Current Sense Resistors(CSR) to DDR3 socket. |
| CV09DDR3-J1: with VDD Switch
Device Holes.
Option: +CSR x1 Add Current Sense Resistors(CSR) x1pcs |
| CV09DDR3-J2: (Discontinued)
with VREFDQ, VTT, VDD, VREFCA, VDDSPD, VTT Switch Device Holes. CV09DDR3-J2v2(ODM version) with VREFDQ, VTT, VDD, VREFCA, VDDSPD, VTT Switch Device hole and bit 63-DQ63(pin 234), bit 62-DQ62(pin 233), bit 59-DQ59(pin 115) bit14-DQ14(pin 137) Switch Solder Pads. Option: +CSR x6 Add Current Sense Resistors(CSR) x6pcs |
 |
|
 |
 |
| DDR3 Open-Short test card | |
| CV11R-DDR3 | inquiry |
| CV11R-DDR3+DDR2 Option: +DDR2= CV09R-240S |
inquiry |
Function:
Did you ever burn your motherboard, DDR3 DRAM Module, or other peripheral?
Too many circuits between motherboard and DRAM Module, so if motherboard dead,
shall test circuits open-short at first, it's helpful for repair.
Open-Short Test Card Merits:
1. Save money: Avoid motherboard, DRAM Module, or other peripheral burned for
DRAM Module shortage circuit.
2. Save time: Open-Short test complete only take few minutes for DRAM Module pin to pin;
or circuits between motherboard and DRAM Module.
3. Convenient: Easy use and carry.
4. Powerful:
a. Just test one-pin, can find out multi-pin shortage, it's helpfulness than Scope and Meter.
b. Test Open-Short no need Oscilloscope and Meter, because Scope very
difficult to distinguish Hi-level and VCC/VDD, Low-level and GND/VSS signal.
Others RAM/SDRAM/DDR/DDR2 Memory module series products
| Home | Index |   |
Start: 23/12/2007 Update: 12.07.2011