SH09Pe-mPe2 PCI Express to Mini PCI Express card

1. Insert Converter card into Desktop motherboard, for PCI Express Mini Card test,

can avoid the inconvenience to use NoteBook. 

2. The 52pin socket is 4.6mm height, and parts of  PCB with bare, 

easy to measure Mini Card Front/Back side signals.

3. LED inductor : 12V, 3.3V, 3.3Vaux, 1.5V, WAN, LAN, PAN, PERST, WAKE, WDIS.

4. +NF= add Switch for PCI Express bus power supply(12V, 3.3V, 3.3Vaux, 1.5V) ON-OFF,

can execute Mini card hot swapping and hot plugging test in Power-On,

5. +mSK2= Dual Mini PCI Express socket.

SH09Pe-emPe2 PCI Express external Mini PCI Express card

1. External type from motherboard for testing, Form Factor: 2U, 3U, 4U

2. attached one 15cm and one 30cm cable

(Option: length= 45cm or order different length of Flat cable to match buyer's request)

3. +NF= add Switch for PCI Express bus power supply(12V, 3.3V, 3.3Vaux, 1.5V) ON-OFF,

can execute Mini card hot swapping and hot plugging test in Power-On,

4. +Pe=  add PCI Express slot SH09mPe-T6(Target adapter)

5. +mSK2= Dual Mini PCI Express socket.

CV09mPe-ePe1 Mini PCI Express external PCI Express card 

1. External type card from Mini PCI Express bus outside to normal PCI Express card.

2. if PCI Express slot use 12V power source, must DIY solder on SH09mPe-T6.

3. LED inductor : 1.5V, GND(=3.3V), 12V.

4. attached one 15cm and one 30cm cable

(Option: length= 45cm or order different length of Flat cable to match buyer's request)

5. +NF= add Switch for Mini PCI Express bus power source(3.3v, 1.5v) ON-OFF,

can test Mini card in Power-ON(simple hot swapping and hot plugging card),

6. +U=  add USB connector and Cable B, for input 5V power source to USB.

CV09mPe-ePe2 Mini PCI Express external PCI Express card

1. External type card from Mini PCI Express bus outside to normal PCI Express card.

2. if PCI Express slot use 12V power source, must DIY solder on SH09mPe-T6.

3. LED inductor : 1.5V, GND(=3.3V), 5V, 12V.

4. attached one 15cm and one 30cm cable

(Option: length= 45cm or order different length of Flat cable to match buyer's request)

mSK2 Dual Mini PCI Express socket

1. For one Mini PCI Express Gold Fingers to two Mini PCI Express socket, 

can use one Full-Mini card and one Half-Mini card .

2. Must DIY solder PERP0/PERN0/PETP0/PETN0 signals.